60062RS C3-manufacture,factory,supplier from China

At the 2024 China Automotive Forum held on July 12th, SKF was awarded the "2024 China Automotive Industry Sustainable Development Practice Outstanding Award" by the China Association of Automobile Manufacturers.

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

What material is bearing steelBearing steel is a steel used to manufacture balls, rollers, and bearing rings. Bearing steel has high and uniform hardness, wear resistance, and high elastic limit. Strict requirements are placed on the uniformity of chemical composition, content and distribution of non-metallic inclusions, and distribution of carbides in bearing steel, making it one of the most stringent steel grades in all steel production.

The bearing ring raceway is the surface of the bearing workpiece, and its quality will directly affect the working performance and service life of the bearing. During use, we often find common quality problems on the surface of bearing rings. How do these quality problems arise? Based on years of experience, here are common quality problems and their causes on the surface of bearing rings.1.

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

1、 What is bearing chamfer?Chamfer is a term used in mechanical engineering. In order to remove burrs caused by machining on parts and to facilitate assembly, chamfers are generally made at the ends of parts. Chamfering can be seen everywhere in our daily lives, on the borders of mobile phones, on tempered doors, on vases, and so on.The general purpose of chamfering is to remove burrs and make it aesthetically pleasing.

Air bearings and magnetic levitation bearings are both high-precision, non-contact bearing technologies, but their principles and application scenarios are different.1.Principle: Air bearings use the compression of gas to generate support force, which floats the rotor and achieves the function of bearings. The supporting force of air bearings mainly consists of two parts: one is the air film pressure, and the other is the inertial force.

1. Is the outer packaging clearIn general, legitimate brands have their own dedicated designers to design the external packaging and arrange factories with qualified production conditions for production. Therefore, the packaging is very clear and unambiguous from lines to color blocks.2. Is the steel stamp clearThe brand name, number, etc. will be printed on the imported bearing body of FAG. The font is very small, but most of the products produced by the factory use steel stamping technology and are pressed before being overheated.

The so-called burn damage state of  bearings refers to the rapid heating of the raceway wheel, rolling element, and retainer of  bearings during rotation until discoloration, softening, deposition, and damage occur.The main reason for bearing burns is due to poor lubrication of  bearings, which may have used non-standard lubricants or excessive or insufficient lubricants, both of which are incorrect. Secondly, it may be due to excessive load (excessive preloading). The rotational speed is too high. The clearance is too small. There is water or other foreign objects invading.

On November 12, at the 15th China International Aviation and Aerospace Exhibition held in Zhuhai, Guangdong Province, bearing products with multiple specifications, high precision and tip were presented at the exhibition. Wang Qiyao, Chairman of the Standing Committee of the Dalian Municipal People's Congress, visited the tile axle booth to gain a detailed understanding of the company's reform and development, technological research and development, and other aspects.