HGW25HC Block-manufacture,factory,supplier from China

What is hot installation of machine tool bearings? How should we heat up the bearings of machine tools? Machine tool bearing hot installation generally refers to a heating process that involves installing the inner trap of the bearing onto the bearing block of the transmission shaft, and is divided into two processing processes: hot installation (or hot installation) and cold installation.

As the Chinese New Year holiday draws to a close, factories across the country are gearing up to resume production. With workers returning from festive celebrations, production lines are expected to restart in full swing, marking the beginning of a new year of business activity.While the holiday may have disrupted normal business schedules, it also provided a brief but necessary respite for factory workers who are now returning with renewed energy.

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

Dear Friend:The Spring Festival(Chinese New Year) is coming.SFC factory will be on vocation starting today,with a holiday period from (2024.2.1-2.16),and will officially start work on the 17th.Please place your order in advance so that you can arrange your order production reasonably after work.Thank you for your trust and support.SFC Factory

1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that of heavy-duty bearings. You must understand this. In order to meet different industrial production or processing needs, bearings must have different performance. The different materials of various bearings are actually due to this reason.Another point is the difference in physical structure.

When determining whether the dismantled bearing can be reused, it is necessary to inspect the condition of the raceway surface, rolling surface, mating surface, wear of the cage, whether the bearing clearance has increased, and whether there are any damages or abnormalities that affect the decrease of dimensional accuracy after cleaning the bearing.

    On 15-18 May ,our company will participate 28th international machine tools,metalworking&automation machine tools,metalworking & automation technology exhibition in KUALA LUMPUR.     Welcome to our booth!    Booth number:3392Opening Hours:15-17 May (Wed-Fri.):10am-6pm18 May(Sat)               :10am-4pm

Herzogenaurach | October 2, 2024 | On October 1, 2024, Schaeffler Group successfully completed the merger of Weipai Technology Group. The merger will be registered for business on the same day, marking the official effectiveness of the merger between the two parties. At the same time, all non voting ordinary shares of Schaeffler have been converted into fully voting ordinary shares.

When replacing peripheral parts of the device, carry out regular maintenance, operational checks and inspections of the removed bearings to determine whether they can be reused and whether they are in good or bad condition.First, carefully examine and note the removed bearings and their appearance. To clarify and check the amount of residual grease, the bearings must be thoroughly cleaned&nbs

Cast iron bearing seatAdvantages:Low cost: Cast iron materials are relatively inexpensive and suitable for situations with limited budgets.High hardness: In ordinary cutting processes, the hard and brittle nature of cast iron makes cutting easier.Suitable for low-speed, light load, and situations that do not require high-precision operation: The brittleness of cast iron may cause it to fracture when impacted, making it unsuitable for high-speed or heavy-duty environments.Disadvantages:Poor toughness: prone to rupture under heavy loads or high-speed operation.Not suitable for harsh environments